Parasitic Impedance
Plated through-holes in multilayer printed circuit boards add unwanted series inductive reactance to high-speed signal paths. The total magnetic field energy stored within the conductive cylinder defines the barrel inductance, which degrades signal transitions at microwave frequencies. This inductive property scales directly with via length and inversely with cylinder diameter.
The boundary of this parasitic calculation applies specifically to the vertical plated copper wall, excluding top and bottom capture pads.
Transition Discontinuity
High edge-rate voltage step signals experience degradation when traversing vertical layer transitions. As current flows through the vertical cylinder, barrel inductance causes local impedance spikes that create signal reflections and timing jitter on gigabit channels. In power delivery networks, this parasitic inductance impedes rapid current delivery from decoupling capacitors to active semiconductor dies, resulting in power rail voltage droop.
Designers minimize this inductive impact by placing multiple vias in parallel or shortening via barrel length through thin dielectric stackups. Vector network analyzers measure via impedance profiles using time domain reflectometry techniques. Back-drilling unused via stubs further reduces parasitic inductance and eliminates open-stub signal resonances.
Aspect Ratio
Thicker circuit boards increase the physical length of the copper cylinder. Extended vertical copper walls elevate total barrel inductance, requiring wider drill diameters to compensate. Fabricators enforce aspect ratio limits during chemical plating to maintain uniform copper wall thickness throughout the hole.