Dimensional Deviation
Plating deficiency in printed circuit board through-holes occurs when copper deposit thickness falls below the minimum specified tolerance within the cylindrical wall. This variation, known as barrel thinning, typically arises during the electroplating stage from uneven current distribution or inadequate agitation of the chemical bath. It compromises the electrical and thermal pathway of the via.
Failure Mechanism
Inadequate copper thickness in the hole center accelerates fatigue under thermal stress. When the assembly experiences temperature cycling during reflow or operation, the differential expansion between the copper barrel and the surrounding laminate generates stress concentrated at the thinnest section. This localized stress eventually leads to circumferential cracking, causing intermittent open circuits or total connection failure.
Boards with dense copper patterns nearby are particularly vulnerable because they distort the electric field during plating, leaving the isolated holes with even less metal than predicted. Corrective action requires balancing the bath chemistry, adjusting anodes, or slowing the plating rate.
Verification Method
Microsection analysis of representative test coupons provides the standard technique for checking plating uniformity. Technicians cut, mount, and polish the sample to expose the vertical cross-section of the plated through-holes. High-magnification optical inspection then measures the copper thickness at multiple points along the barrel wall to ensure compliance with IPC standards.