Bevel Measurement
The angular relief machined along the leading edge of a printed circuit board tongue provides a smooth transition that allows a gold-plated finger array to slide into a card-edge connector. This feature, known as the chamfer angle, reduces the board edge thickness to prevent the mating contacts from stubbing against the rigid glass-epoxy laminate. The dimension is typically specified as thirty degrees or forty-five degrees relative to the board face, with tolerances tightly controlled to prevent contact misalignment.
Designers specify this taper to ensure that the initial contact occurs on the gold pad rather than on the raw fiberglass core.
Insertion Force
A steep slope increases the insertion force required to seat the board in its mating slot. This resistance can damage delicate metal contacts and lead to intermittent electrical connections or complete circuit failure.
Tooling Guideline
Routing or milling with a dedicated beveling machine creates this beveled edge during the board singulation step. A precise tool depth must be maintained to prevent the cut from encroaching on the gold-plated contact fingers or reducing the laminate thickness below the structural minimum. Tool wear remains a major source of variation, as a dull blade generates burs that can carry conductive debris into the card-edge socket.
Consequently, automated optical inspection verifies both the angle and the remaining flat land after machining.