Deposit Porosity
Volumetric measurement of unplated gaps within electrodeposited metal tracks tracks empty spatial fractions across through-holes, blind microvias, and planar traces. The copper void volume expresses the cumulative empty space left by incomplete chemical deposition, captured gases, or uneven current distribution during electrolytic copper plating. High copper density ensures predictable current handling capability and mechanical strength against thermal shock expansion along the board vertical z-axis.
The physical boundary stops at the electrodeposited metal interface, omitting gas pockets within fiberglass resin matrices or voids situated in exterior solder joint alloys.
Microsection Measurement
Destructive vertical cross-sectioning and focused ion beam milling reveal internal plating microcavities within plated through-hole barrels and filled microvia structures. Optical microscopy combined with scanning electron microscopy captures high-contrast cross-sectional images, which automated image analysis tools process to calculate spatial void area fractions. High-resolution X-ray computed tomography computes the total three-dimensional void spatial fraction non-destructively, producing a quantitative ratio of hollow spatial cavities to nominal copper fill volume.
Incomplete acid copper plating brightener balance, organic contamination, or poor fluid agitation within microvia recesses generates centralized wedge voids or micro-porosity clusters. Thermal stress tests, including solder float simulations at two hundred and eighty-eight degrees Celsius, precede cross-sectional void quantification to detect crack formation originating at internal void sites. Plating chemistry degradation directly increases the copper void volume within blind vias, triggering internal barrel cracking under thermal expansion loads.
Local current density spikes accelerate plating bridge formation across via mouths, entrapping electrolyte fluid within unfilled lower pockets.
Acceptance Boundary
Acceptance requirements defined in IPC-6012 dictate maximum permissible void volumes within copper plating, classifying excessive empty gaps as fatal non-conformances. Finished class three printed boards mandate that copper-filled microvias contain less than fifteen percent void area in cross-section, with completely unfilled cavities prohibited in structural stacked via structures. Plating barrels showing continuous circumferential copper voids or void cross-sections exceeding ten percent of the plated wall thickness fail final quality inspection.
Non-compliant panels are quarantined and scrapped to eliminate the operational risk of open circuits caused by thermal expansion stress in field conditions. Microsection quality records log the measured copper void volume across every manufactured production coupon to certify process bath stability. Traceability protocols link plating bath additive dosing records to via fill void performance for lot acceptance sign-off.