Anisotropy Class
Anisotropic electromagnetic behavior arises when dielectric properties of a medium vary along different spatial axes. Within multi-layer printed circuit boards, dielectric tensor splitting describes the divergence of the permittivity tensor components due to the structured alignment of glass fibers and resin. This physical variation creates directional differences in the velocity of propagating electromagnetic waves.
Signal paths running parallel to the glass yarn experience different effective permittivity than those aligned with the resin-rich gaps. In high-speed applications, this split yields variation in impedance and velocity depending on the routing angle of the transmission line relative to the fabric weave of the reinforcement laminate.
Velocity Deviation
Differential signal routing suffers when the two conductors of a pair encounter different dielectric environments. This divergence in local permittivity causes a shift in the propagation delay of each line, which results in skew. By measuring the phase differences across a test coupon, board designers characterize the extent of the permittivity mismatch.
The propagation discrepancy leads to a conversion of differential signals into common-mode noise, which degrades signal margins.
Skew Generation
Managing high-speed performance requires specific fabric weaving techniques to minimize directional dielectric variation. Glass styles with flat, tightly spaced bundles yield more uniform permittivity across the substrate than loose, open weaves. Fabricators often specify mechanical rotation of the circuit pattern or the use of glass with closer-packed yarns to reduce dielectric tensor splitting.
These mitigation techniques lower the total jitter and preserve the eye opening at high transmission frequencies.