Dielectric Loss
Dielectric behavior in printed circuit board materials shifts when absorbed moisture exists in an unbound state within the polymer matrix. This free water relaxation occurs when unattached water molecules polarize in response to an alternating electric field and dissipate energy as heat. Unlike bound water that is restricted by hydrogen bonds, these mobile molecules respond to gigahertz frequencies, causing increased dielectric loss.
High frequency designs must account for this phenomenon to prevent signal attenuation and impedance mismatch. Solder reflow cycles can sometimes drive out this moisture, but the laminate remains susceptible to reabsorption in humid environments.
Molecular Mobility
Unbound water molecules reside in microvoids within the epoxy resin and retain their rotational freedom. When exposed to high frequency electromagnetic fields, these molecules rotate to align with the changing field vector. This rapid rotational movement generates frictional heat at specific relaxation frequencies, typically above ten gigahertz.
Materials with lower void volumes reduce the space available for such free molecules.
Signal Degradation
Absorbed moisture alters both the dielectric constant and the loss tangent of the substrate. As a result, propagation velocity decreases and signal attenuation increases along transmission lines. This degradation is problematic for high speed digital and radio frequency circuits.
Keeping boards dry prevents these fluctuations from compromising system performance.