Void Formation Class
Thermally induced mechanical strain in printed circuit board metallization causes microscopic vacancy coalescence inside narrow conductor traces and via target pads. Tensile stresses arising from thermal expansion mismatch between copper tracks and surrounding dielectrics drive atom migration away from high-stress zones. Interconnect stress voiding represents a passive degradation mechanism where atomic diffusion creates empty cavities inside copper interconnects without external current flow.
Unlike electromigration, this structural defect develops under thermal storage conditions or low-current operating states.
Diffusivity Stress Mechanism
High hydrostatic tensile stress combined with elevated ambient temperature accelerates vacancy diffusion along grain boundaries within electrodeposited copper. Sub-micron voids nucleate at localized stress concentration points, such as microvia corners and capture pads. As thermal baking or thermal cycling continues, small vacancies coalesce into larger structural voids that constrict the cross-sectional conductive area of the trace.
The resulting reduction in copper volume increases localized electrical resistance and produces eventual open-circuit electrical failure under operating loads. Narrow trace geometries below ten micrometers exhibit heightened susceptibility to this failure mode due to high grain boundary density per volume unit.
Reliability Boundary Limit
Qualification testing subjects finished circuit assemblies to unbiased thermal storage at temperatures up to 150 degrees Celsius for extended durations. Electrical resistance monitoring during thermal testing flags resistance increases exceeding five percent.