Mass Loss
Loss of mass from a material held at a constant temperature results from the steady evaporation of volatile components. Laboratory technicians use isothermal volatilization to characterize the stability of solder flux or adhesive resins during the heating cycle. The rate of mass change provides a signature for how the material will behave in a reflow oven.
Thermal Evaluation
Thermogravimetric analysis equipment measures the precise weight of a sample over a set duration while the environment stays at a fixed level. When observing isothermal volatilization, a rapid drop in weight indicates the presence of low-temperature additives that might flash off too quickly. A slow and steady decline suggests a more stable formulation suitable for long soak profiles.
Process Implication
Manufacturing engineers use this data to set the duration of the preheat and soak zones to ensure all necessary outgassing finishes before the solder reaches its melting point. Incomplete isothermal volatilization can lead to entrapped gases within the joint which results in internal voids that weaken the mechanical connection. Excessive loss too early in the cycle might leave the flux too dry to effectively remove oxides from the metal surfaces.
Understanding the time-to-evaporation at specific temperatures allows for the optimization of oven belt speeds and zone settings.