Particle Sizing
Optical particle characterization measures the angular variation in scattered light intensity produced when an expanded laser beam passes through a dispersed particulate sample. Solder powder manufacturing and solder paste incoming inspection employ laser diffraction to capture the volumetric distribution of micro-fine metal spheres. Standardized protocols, including ISO 13320, translate measured forward and wide-angle scatter patterns into equivalent spherical diameters using Fraunhofer approximations or Mie scattering theory.
The measurement envelope applies solely to dispersed powders suspended in compatible liquid media or dry aerosol streams, ending where particles agglomerate or exceed optical sensor dynamic range.
Powder Classification
Stencil printing yields depend directly on precise metallic grain sizing to ensure smooth aperture release across fine-pitch land patterns. Solder paste classification under J-STD-005 defines discrete type ranges based on volumetric cumulative passing percentiles. Through laser diffraction analysis, technical technicians confirm nominal diameter cutoffs, identifying oversize flakes that plug sub-hundred-micron apertures or excessive fines that accelerate solder balling during reflow.
Fines possess expansive surface areas that consume activators through rapid oxidation, reducing available wetting energy. Clean unimodal curves verify that atomization gas-to-metal ratios produced spherical, defect-free particles suitable for dense array interconnects.
Inspection Acceptance
Incoming material labs run scatter profiles to screen alloy powders before flux blending, rejecting shipments showing abnormal bimodal distributions. When irregular satellites or particle clusters exist, wide-angle detectors register false fine or coarse peaks that signal improper atomization. Automated software computes the distribution span, flagging excessive distribution spreads that cause unstable print rheology.
Quality audits correlate diffraction data with automated optical inspection bridge counts to prevent stencil clogging on assembly lines. Consistent powder sizing verified through optical scattering maintains reproducible transfer efficiencies through miniature stencil apertures.