Geometric Field
Theoretical electrodynamic force lines between the anode and the cathode determine the initial pattern of metal deposition in an electroplating bath. In primary current distribution, this pattern is governed entirely by the physical geometry of the plating cell and the electrical resistance of the electrolyte. It assumes that there are no electrochemical reactions or mass transport limitations occurring at the board surface.
As a result, the electric field lines concentrate heavily at the corners and outer edges of the circuit board panel.
Edge Effect
High current concentration at the sharp points of a cathode results in excess metal deposition. Under the influence of primary current distribution, the borders of the panel receive a high rate of copper. This uneven deposition is called the edge effect.
Modeling Utility
Computer-aided simulation of the electrodynamic field helps engineers predict plating variations before tooling begins. Although primary current distribution neglects the evening effects of organic additives and electrode polarization, it establishes the baseline scenario for any plating cell design. By adjusting the distance between the anode and the cathode, fabricators can optimize the layout to minimize thickness variations across the panel.
This physical modification of the plating cell setup remains the first line of defense against poor plating uniformity.