Correction Model
Optical calibration algorithms use mathematical curves to compensate for the geometric warping introduced by wide-angle camera lenses. The radial distortion polynomial models this curvature, representing how light rays bend increasingly as they pass further from the optical center of the lens. Applying this mathematical correction aligns the captured digital image back to a perfect Cartesian plane.
Numeric Correction
Calculating the correction coefficients requires capturing images of a grid target and measuring the non-linear displacement of each point. Software algorithms use the radial distortion polynomial to adjust the coordinates of each pixel based on distance from the center. If the polynomial is not computed correctly, the outer edges of the image will appear stretched or compressed, ruining any dimension measurements in those areas.
High-performance inspection software applies this calculation in real time to every frame captured by the camera. The adjustment ensures that components placed near the edge of the field of view are measured as accurately as those in the center.
Measurement Accuracy
Precise dimensional measurement in printed circuit inspection relies on this flat, corrected image field to check lead spacing. Standard systems resolve spacing errors down to several micrometers when the lens distortion is fully compensated. Eliminating the warping allows the automatic optical inspection system to run with tighter tolerance limits without generating false defects.