Fluid Transport
Archimedes screw technology generates the directional pressure necessary to lift viscous solder paste or thick conformal coatings from a reservoir to an application head. A spiral pump relies on a rotating helical shaft inside a tightly toleranced chamber to force material forward without the high shear forces inherent in diaphragm mechanisms. Consistent material delivery depends on the rotational velocity of the screw relative to the viscosity of the fluid.
This design prevents air entrapment during the dispensing process which reduces the risk of voids in the final solder joint.
Conveyor Mechanism
Precise metering occurs as the threads of the internal helix pull fluid through the barrel. Rotation drives the volume forward while the fixed wall of the outer cylinder prevents backflow. Each turn of the motor corresponds to a fixed quantity of output volume based on the pitch of the screw.
Calibration of the dispenser requires mapping the rotational speed to the resulting flow rate for each specific fluid grade. This setup achieves high repeatability in micro-dispensing operations where volume accuracy dictates the quality of the component connection.
Performance Limitation
Wear between the metal helix and the cylinder wall degrades output accuracy over time. Abrasive fillers present in thermal interface materials or high-silver solder pastes accelerate the erosion of the housing dimensions. Deviations from the original clearance allow fluid to slip backward during the rotation cycle, resulting in reduced output volume per revolution.
Regular inspection of the internal geometry ensures that the dispensing system maintains the tolerances required for fine pitch assembly.