Reinforcement Fabric
Continuous filament yarns interlaced on textile looms provide tensile strength, dimensional stability and dielectric reinforcement inside printed circuit board laminates. Electronic-grade woven glass cloth, commonly formed from electrical E-glass or low-loss L-glass filaments, forms the structural skeleton of rigid multi-layer copper-clad laminates and prepregs. The fabric matrix is coated with silane coupling agents to bond chemically with surrounding epoxy, polyimide or fluoropolymer resin systems during hot press lamination.
Fiber Skew
Physical spacing between individual glass yarn bundles introduces localized dielectric variations across the planar area of a circuit board. Glass filaments exhibit a relative permittivity near 6.0, whereas cured epoxy resin exhibits a permittivity near 3.0. A differential signal pair routed across woven glass experiences timing jitter and signal distortion when one trace travels directly over a dense fiber bundle while the twin trace travels over a resin-rich window.
This fiber weave effect becomes a dominant source of phase skew and bit error rate degradation in high-speed digital channels operating above 10 gigabits per second. Fabricators and board designers counter this effect by using spread-glass styles such as 1067, 1078 or 3313, where mechanical spreading flattens the yarn bundles to eliminate open resin windows. Traces may also be routed at an intentional angular bias relative to the fabric warp and weft yarn axes to average out the underlying dielectric variations.
Impregnation Void
Resin wetting during prepreg manufacturing determines the long-term electrical reliability of the composite structure. Incomplete chemical penetration into woven glass yarn bundles leaves microscopic air pockets that promote conductive anodic filament growth along bundle boundaries under high electrical bias and humidity. Laminate inspection involves cross-sectional optical microscopy to verify that the resin fully encapsulates all individual glass filaments.
Resistance to moisture absorption and thermal breakdown guarantees that circuit substrates maintain required breakdown voltages during long operating lifetimes.