Fabric Specification
Glass style designations categorize the lightweight fabrics used as reinforcements in thin printed circuit board laminates. The 106 weave refers to a specific ultra-thin fiberglass fabric with a nominal thickness of approximately 1.3 to 1.5 mils. This fabric is woven with a very low yarn count in both warp and fill directions, creating a structure with relatively large gaps between the glass bundles.
Dielectric Impact
Resin distribution within this fiberglass reinforcement directly affects the local dielectric constant of the laminate. When a high-speed transmission line runs over a region with alternating glass bundles and resin-filled gaps, the signal experiences varying propagation delays. The open structure of the 106 weave creates a non-uniform medium because the dielectric constant of the glass differs from that of the epoxy resin.
Such variations in the dielectric environment can degrade the quality of high-speed digital signals.
Signal Integrity
High-speed signal propagation suffers from skew and phase distortion when traveling through boards made with non-uniform fabric patterns. Because the yarn density is low, differential signal traces running over the 106 weave can experience severe differential skew if one trace runs primarily over a glass bundle while the other runs over a resin gap. Designers often use alternative glass styles or run traces at an angle to mitigate these effects.
Fabricators can also employ spread-glass variants of this style to improve uniform resin distribution across the laminate area.