Vertical Ratio
Mathematical metrics calculated from wet subtractive etching profiles express the degree to which vertical dissolution exceeds lateral undercut. The anisotropy factor quantifies this directional bias by comparing vertical etch depth against horizontal recess along feature sidewalls. Values range from zero for isotropic chemical etching to unity for ideal anisotropic plasma ablation.
In printed circuit board fabrication, chemical spray systems yield intermediate ratios because liquid flow dynamics favor downward fluid transport over lateral diffusion.
Subtractive Profile
Chemical mass transport dynamics alter the profile of narrow copper conductors as trace pitch narrows below fifty micrometers. Continuous replenishers and directional spray nozzles increase vertical fluid shear against copper foil, which elevates the anisotropy factor above standard immersion tank limits. When undercut progresses unchecked, trace foot width remains fixed while top trace width contracts, producing trapezoidal cross sections that shift electrical impedance away from target values.
Microscopic inspection of polished microsections reveals whether chemical additives successfully inhibit horizontal sidewall dissolution.
Process Limit
Conductor geometry limits establish the threshold where wet chemistry can no longer maintain straight vertical walls. High anisotropy factor values reduce trace undercut, preserving trace cross-sectional area while enabling tight trace spacing on high-density interconnect layers. Failure to maintain acceptable directional etching leads to trace necking or complete feature lifting prior to reaching full dielectric depth.