Geometric Sensitivity
Chemical etching of high-aspect-ratio features on circuit boards is a subtraction process where the depth-to-width ratio of the recess determines the rate of material removal. In industrial fabrication, aspect ratio etching represents the progressive decrease in etch rate as trenches or microvias become deeper and relatively narrower. This deceleration occurs because fresh chemical reactants struggle to penetrate the restricted cavity while spent byproducts cannot easily escape.
Diffusion Limitation
Fluid dynamics within a narrow slot restrict the exchange of spent copper ions for fresh chemical etchant. The boundary layer thickness increases inside the recess, creating a transport bottleneck. This restriction slows the arrival of active molecules to the copper surface.
In shallow trenches, spray pressure drives convective mixing that overcomes these boundary layers, but deep vias must rely on slower molecular diffusion. Consequently, the local chemical concentration gradient becomes depleted, halting the reaction before the target depth is reached. When the depth of the via exceeds three times its width, the replenishment rate drops to a fraction of the open-field rate, leading to incomplete channel formation.
Without sufficient agitation or chemical modification, the metal at the base of the trench remains unreacted while the top entry experiences unwanted lateral expansion.
Fabrication Compensation
Process parameters in the spray chamber require active adjustment to minimize non-uniformity across different feature sizes. Adjusting nozzle pressure and modifying the chemical feed rate can mitigate the differential etch rates. Fabricators utilize specific surfactants to lower surface tension, allowing the solution to wet deep cavities more effectively.
This chemical adjustment reduces the discrepancy between wide and narrow trenches, ensuring consistent depth.