Section Preparation
Dry plasma ablation positioned at the final stage of metallurgical cross-sectioning cleans and levels sample faces using wider inert gas beams than focused ion systems. During cross-sectional analysis of printed circuit board assemblies, broad ion beam milling uses argon ions directed across a stationary tungsten or molybdenum shield edge to slice through heterogeneous materials. Standard mechanical grinding leaves plastic deformation and embedded abrasive grit across soft copper traces, while ion ablation creates damage-free cross sections.
Planar Polishing
Wide ion angles remove material across several millimeters of target area simultaneously to produce flat surfaces across soft matrix resins, hard glass fibers, copper traces, and intermetallic compounds. Differential sputtering rates between brittle glass filaments and ductile copper pads are mitigated by rocking sample stages during irradiation. Process duration varies with target material density and beam current density.
Artifacts like curtaining lines are reduced by dual-gun configurations continuously altering ion incidence angles.
Damage Eradication
Mechanical stress introduced during diamond saw cutting masks subtle micro-cracks in solder joints and delamination at dielectric interfaces. Argon beam etching removes deformed surface layers without smearing soft copper into adjacent voids or glass weave gaps. High-resolution scanning electron microscopy relies on broad ion beam milling to reveal genuine grain structures and interface boundaries.