Sequential Failure
High-speed digital links utilizing decision feedback equalization are susceptible to a compounding sequence of receiver decision errors. This phenomenon of burst error propagation occurs when a single incorrect bit decision fed back into the equalizer filter creates a persistent bias that causes subsequent bits to be misidentified. The erroneous feedback shifts the threshold voltage, increasing the probability of additional errors until the feedback register clears.
When the tap weights of the equalizer are large, the bias is strong and the resulting error streak can extend across dozens of bits before the filter restores correct operation.
Feedback Action
Equalization taps feed past decisions directly into the summing node to cancel intersymbol interference from previous bits. When a bit error is introduced, burst error propagation is initiated as the incorrect value is multiplied by the tap weight, shifting the slicing threshold in the wrong direction. This offset persists for a duration equal to the length of the feedback filter.
Correction Boundary
Error correction codes must be structured specifically to handle clustered failures rather than isolated single-bit errors. Forward error correction algorithms such as Reed-Solomon are frequently deployed to combat burst error propagation because they process symbols of multiple bits and can correct consecutive errors up to a defined block boundary. Such codes protect the integrity of high-speed transmission channels.