Structural Failure
Delamination of conductive copper from a dielectric base represents a severe mechanical defect in printed board fabrication and assembly. This specific occurrence of capture pad lift happens when the adhesive bond between the copper foil and the epoxy glass matrix fails under localized mechanical load or thermal stress. It most frequently occurs at plated through holes or vias where solder joints are formed, because the thermal expansion of the copper differs from that of the surrounding composite material.
The adhesive layer degrades under these conditions, allowing the pad to rise above the board surface. Once the pad rises, it can lead to broken traces or weak solder connections that compromise the circuit.
Thermal Origin
Heat distribution across a multilayer board during assembly determines the likelihood of adhesive failure. While modern laminates withstand standard solder profiles, localized overheating or manual rework often initiates capture pad lift. Hand soldering of thick ground planes requires high tip temperatures, which can quickly exceed the glass transition temperature of the laminate.
Once this threshold is crossed, the mechanical grip of the resin decreases, and the pad separates.
Reject Threshold
Acceptance criteria for printed boards dictate the maximum permissible separation under standard workmanship guidelines. Any lift that exceeds the thickness of the copper layer is classified as a nonconformance. Automated optical inspection identifies the defect by detecting shadows or height variations around the annular ring.