Surface Topography
Microscopic roughness on the bonding side of conductive metal sheets determines both the mechanical adhesion and the high-frequency performance of circuit trace networks. The copper foil tooth profile defines the depth and shape of the anchoring ridges created during electrochemical foil deposition. These ridges interlock with the prepreg resin during board lamination.
Modifying the foil topography allows fabricators to balance the physical holding force with the requirements of high-speed transmission lines.
Signal Behavior
Electromagnetic energy travels along the outer boundary of a conductor at high frequencies due to the skin effect. When the signals encounter a rough copper foil tooth profile, the propagation path is lengthened and resistive signal loss increases. This loss becomes severe at frequencies above ten gigahertz, where the skin depth is less than the average tooth height.
Designers specify low-profile copper or very low-profile copper to minimize this dielectric loss in gigabit-range applications.
Bond Strength
Peel testing measures the force required to detach the foil from the laminate to ensure the assembly does not fail under thermal stress. Smooth foils reduce high-frequency attenuation but exhibit lower physical peel strength. In multi-layer circuit boards, this trade-off is managed by using chemical adhesion promoters.