Solder Adhesion
Molten solder pulls away from a metallic surface during wave soldering or reflow because intermetallic compound layers form improperly or base metal wettability fails entirely. Component leads or circuit board pads exhibit exposed bare copper or nickel beneath a thin, pulled-back bead rather than a continuous metallic bond. Surface tension forces exceed the interfacial energy between the liquid alloy and the solid substrate.
Contamination from organic residues or extreme oxidation prevents atomic diffusion across the boundary layer.
Interfacial Failure
Thermal exposure during the soldering cycle drives base metal oxidation when flux activity exhausts prematurely. Excessive dwell time at high temperature thickens the intermetallic layer beyond structural limits, causing mechanical shear under cooling stresses. Poor plating thickness on printed circuit board pads leaves microscopic porosity that traps cleaning agents.
Subsequent heat application vaporizes these trapped volatiles, pushing the molten alloy away from the affected site.
Bonding Verification
Optical inspection systems detect exposed substrate areas by measuring light reflection differentials between shiny solder fillets and dull base metals. Automated x-ray equipment evaluates internal void percentages within the joint structure to determine if thermal profiles caused localized separation. Destructive cross sectioning reveals grain boundary defects and microscopic voids at the junction between the copper trace and the tin lead alloy.
Manufacturers adjust conveyor speeds, preheat temperatures, and flux dispensing rates to maintain correct surface energy balances across every assembly batch.