Thermal Balance
Thermal balancing processes are used in reflow soldering to minimize the temperature variance across a printed circuit board assembly. Within SMT manufacturing, delta T management is the practice of tuning oven profiles to ensure that heavy components with high thermal mass and light components with low thermal mass reach their target temperatures within a narrow time window. Achieving a low temperature difference across the assembly prevents defects such as tombstoning of small passives or thermal damage to sensitive integrated circuits.
This practice involves setting zone temperatures and conveyor speeds to allow thermal equilibrium to occur.
Process Control
Circuit boards with heterogeneous layouts present a challenge because large connectors act as heat sinks while small resistors heat up rapidly. To achieve effective delta T management, multi-zone convective ovens are used to apply heat gradually. Slower conveyor speeds allow more time for heat to distribute laterally through the copper planes of the PCB.
Thermocouples are attached to various points on a test board to measure the temperature spread across the board in real time.
Conveyor Optimization
High-volume production lines require the conveyor speed to remain as high as possible without exceeding the target delta T limit. Adjusting the convection fan speeds in individual oven zones provides another way to balance heat transfer. This adjustment allows the process engineer to fine-tune the heat transfer rate without slowing down the line.