Optical Metrology
Non-contact profile measurement uses computer-generated sinusoidal intensity patterns directed onto target topologies to yield quantitative three-dimensional surface coordinates. Quality technicians apply digital fringe projection across bare printed wiring boards and assembled modules to acquire continuous height distributions without mechanical stylus contact. Solid-state digital micromirror engines beam periodic grating lines across the board surface at known incident angles.
Reflected lines deform along surface elevation steps, and an area-scan charge-coupled sensor captures these distorted phase patterns. The technique stops functioning on specular copper surfaces where direct specular glare saturates camera sensor pixels, necessitating matte coatings or diffuse illumination strategies.
Phase Demodulation
Captured fringe images undergo multi-step spatial or temporal phase-shifting algorithms to extract local phase distribution from continuous intensity data. The computed phase values wrap across recurring mathematical cycles bounded between negative pi and positive pi. Unwrapping algorithms resolve absolute height steps by aggregating continuous integer fringe orders across the field of view.
Height values map directly from unwrapped phase using calibration matrices derived from optical triangulation geometry. Optical lateral resolution depends upon camera sensor pixel density, while vertical resolution reaches sub-micron levels on diffuse solder mask substrates.
Warpage Verification
Automated inspection units execute digital fringe projection to quantify printed wiring board warpage during simulated thermal soldering excursions. The optical apparatus mounts above an environmental chamber, tracking laminate deformation through optical quartz viewports. Quantitative data maps identify excessive package saddle deformation and spherical warpage prior to surface mount assembly.
Facilities use these topographies to reject bare boards failing maximum out-of-plane displacement criteria under IPC acceptance clauses. Non-contact phase mapping identifies defective component layouts susceptible to solder bridging prior to production reflow commitment.