Shielding Function
Composite resin materials provide a stable and heat-resistant carrier for printed circuit boards during wave soldering or reflow processes. Manufacturers use durostone pallets to support thin or oddly shaped boards that would otherwise warp or sag under high temperatures. These carriers are machined from reinforced glass-fiber plastic that withstands thousands of thermal cycles without losing its dimensional accuracy.
Thermal Protection
Machined cavities in the carrier protect bottom-side components from direct contact with molten solder or excessive infrared radiation. By masking specific areas, the durostone pallets allow for the selective soldering of through-hole pins on boards that already have surface-mount devices attached to the underside. The material properties prevent solder from adhering to the pallet itself, ensuring a clean release after the board passes through the wave.
Precision tolerances in the machining process ensure that the board sits level, which is necessary for maintaining a consistent solder height across all pins. Sturdy clamps or turn-down tabs hold the assembly securely to prevent movement during the turbulent passage over the solder wave.
Material Insulation
Low thermal conductivity prevents the carrier from drawing too much heat away from the board. This insulation helps maintain the target temperature profile for the solder joints. It also protects the edges of the PCB from localized overheating.