Substrate Specification
Circuit board constructions utilizing foil thicknesses exceeding three ounces per square foot support high current loads and improve thermal dissipation. These heavy copper boards are typically found in power distribution systems and automotive converters. They allow for a more compact design by integrating high power circuits directly into the logic board.
The thick metal layers handle the heat generated by power transistors without requiring large external heat sinks.
Manufacturing Technique
Specialized etching and plating processes are required to manage the increased volume of metal. Producing heavy copper boards involves longer dwell times in the etch chemistry to remove the excess material between traces. Thick layers require careful resin filling during lamination to prevent voids or delamination.
Design Constraint
Clearance and trace width requirements are substantially larger than those found in standard signal boards. Heavy copper boards cannot support fine pitch components due to the lateral etching that occurs during the fabrication of thick traces. Designers must account for the increased weight of the final assembly and the thermal mass of the copper during the soldering process.
Increased soldering temperatures or longer preheat times are often necessary to achieve a reliable intermetallic bond. This thermal mass makes the board resistant to rapid temperature changes.