Shielding Structure
Barrier architectures created from vertical arrays of conductive vias connecting ground planes through the thickness of a printed circuit board block electromagnetic radiation. A faraday fence consists of a row of plated holes spaced closely enough to appear as a continuous wall to high frequency signals. This structure isolates sensitive analog circuits from digital noise sources on the same substrate.
It acts as a waveguide beyond cut-off for signals attempting to leak through the gap between vias.
Isolation Physics
Effectiveness of the shield depends on the ratio between the via pitch and the wavelength of the interference. A spacing of one tenth of the wavelength generally provides sufficient attenuation for most commercial applications. If the pitch is too wide, the electromagnetic field leaks through the gaps and induces noise in adjacent traces.
Designers place these fences around the perimeter of radio frequency sections to prevent board edge radiation from interfering with other components.
Manufacturing Tolerance
Fabrication of these structures requires precise registration between the copper planes and the drill patterns. Any misalignment that breaks the connection between a via and the ground plane creates a gap in the shielding. Drill wander or breakout during the plating process reduces the density of the fence.
Inspection routines verify the continuity of every via to ensure the cage maintains its integrity across the entire frequency range.