Fabric Specification
A heavy-grade fiberglass fabric woven from thick yarns represents a standard reinforcement material in thick multilayer printed circuit boards. The glass weave style 7628 utilizes a plain weave pattern where each warp thread passes alternately over and under each fill thread, creating a strong structural layer. This style is widely utilized in standard laminates due to its cost-efficiency and mechanical stability.
It produces a cured dielectric ply thickness of approximately seven mils, which helps fabricators build up board thickness with fewer layers. This thickness makes it an ideal option for double-sided designs and non-critical power distribution boards.
Dielectric Influence
Variation in resin distribution across the dense weave structure affects the local dielectric constant of the laminate. In high-speed circuits, the glass weave style 7628 causes propagation delay differences between differential signal lines because the signals travel over alternating regions of glass yarn and pure epoxy resin. This localized variation leads to phase skew and signal degradation at multi-gigahertz frequencies.
Designing high-speed differential traces over this style requires specific routing angles or the use of spread glass weaves to equalize the dielectric environment.
Mechanical Strength
The rigidity of the cured laminate assists in preventing board warp and twist during thermal exposure in the assembly oven. Laminates containing the glass weave style 7628 provide high tensile strength and puncture resistance during the drilling of plated through-holes. This structural integrity minimizes pad lifting during reworking.
This weave style is common in industrial applications where mechanical durability takes precedence over signal speed.