Measurement Standard
Electrical verification protocols targeting high-speed printed circuit boards and interconnect fixtures rely on uniform mathematical procedures to isolate the performance of a device under test from the artifacts introduced by surrounding test equipment. Published by the Institute of Electrical and Electronics Engineers, the ieee 370 standard defines mathematical methodologies for measuring high-frequency electrical characteristics up to fifty gigahertz. This standard establishes algorithms for de-embedding coaxial connectors, transmission lines, and probe launch fixtures, ensuring that extracted scattering parameters isolate the true behavior of the circuit under review.
Test fixture architectures naturally distort signal rise times, phase relationships, and transmission amplitudes, requiring systematic de-embedding algorithms to remove these test artifacts. The standard classifies fixture design guidelines into specific performance categories, providing mathematical criteria to verify that removed fixture data does not corrupt the integrity of final test measurements.
De-Embedding Algorithmic
Mathematical de-embedding methods documented within the standard include 2x-Thru calibration, 1x-Reflect de-embedding, and impedance-corrected time-domain reflectometry techniques. The 2x-Thru method uses a test fixture comprising two equal halves connected back-to-back, allowing vector network analyzers to calculate fixture s-parameters and mathematically deduct half-fixture lengths from recorded two-port networks. When physical fixture halves cannot join directly, the 1x-Reflect procedure deduces error terms by measuring known open or short circuit terminations situated at the fixture boundary.
The standard outlines specific mathematical checks to prevent errors like non-causal impulse responses, passivity violations, and matrix inversion anomalies from appearing in computed data arrays. These checks prevent engineers from confusing mathematical measurement artifacts with real printed circuit board transmission line reflections.
Interconnect Validation
Product designers buying printed circuit board laminates apply these de-embedding rules to verify conductor losses, dielectric dissipation factors, and manufacturing trace tolerances at microwave frequencies. Signal integrity laboratories use the ieee 370 standard to certify the compliance of high-speed digital channels running PAM4 and NRZ signaling across multi-gigabit backplane topologies. Standardized de-embedding algorithms ensure that measurements taken in different laboratories or on different vector network analyzers yield comparable scattering parameter outputs.
Circuit boards designed with microstrip, stripline, or coplanar waveguide test coupons require these procedures to confirm that calculated attenuation values reflect trace geometry and base material properties rather than launch connector losses. Quality acceptance across high-speed hardware contracts depends on these de-embedding validations to prevent the unearned rejection or false passing of manufactured circuit panels.