Fluid Delivery
Localized thermal delivery is achieved by directing a pressurized stream of heated fluid or gas onto a specific area of a circuit board. An impinging gas jet supplies concentrated thermal energy to melt solder alloys during localized component rework. This method allows targeted heating of a single component without reflowing adjacent passive parts.
Nozzle Configuration
Nozzle geometry and distance from the board surface determine the velocity profile of the gas. The strength of the impinging gas jet drops off rapidly if the nozzle is positioned too far from the target component. Engineers design customized nozzles that match the package outline of ball grid arrays to ensure uniform heat distribution across the entire array of solder balls.
Heat Transfer
Convective heat transfer rates are exceptionally high directly beneath the center of the nozzle. The impinging gas jet breaks through the thermal boundary layer of the component package, which allows for rapid ramp rates during the heating cycle. However, if the jet velocity is too high, it can dislodge small adjacent chip resistors or cause solder to splatter.
Modern rework stations utilize closed-loop pressure sensors to modulate the gas volume and maintain a stable temperature ramp without disturbing nearby components.