Interlayer Adhesion
An anisotropic conductive film provides the mechanical attachment and electrical connection between a flexible circuit and a rigid substrate during thermocompression bonding. Indubond facilitates this function by employing metallic filler particles suspended in a thermosetting adhesive matrix to bridge the gap between conductive pads. Heat and pressure cause the film to flow and then cure, creating a permanent structural joint that resists thermal expansion mismatch.
Bonding Process
Controlled thermal cycles ensure that the adhesive reaches a state of transition allowing the resin to displace contaminants from the contact surfaces before hardening. Indubond requires precise alignment of the bond head to maintain vertical force across the entire connection area until polymerization finishes. Deviations in pressure or temperature result in either an open circuit from insufficient particle deformation or a short circuit caused by excessive particle migration.
Electrical Reliability
Consistency in the contact resistance of a finished joint determines the long term performance of the assembly under mechanical stress. Indubond relies on the mechanical entrapment of conductive particles within the polymer matrix to prevent movement when the assembly undergoes shock or vibration. High quality joints display stability in resistance values across various ambient temperatures because the crosslinked structure of the adhesive restricts particle migration away from the interface.