Structural Breach
Discontinuities found at the boundary between two distinct material phases or layers signify a failure of adhesion or electrical continuity. An interfacial defect appears most frequently at the junction between the copper plating and the inner layer foil or between the solder and the component termination. These anomalies often remain hidden until the assembly undergoes thermal stress or mechanical vibration.
Formation Cause
Contamination during the wet chemistry stages of fabrication or improper desmear processes lead to weak bonding at the layer junctions. If an interfacial defect occurs in a plated through hole, it might show as a barrel crack or a corner crack during the soldering process. Residual oxides or carbon particles from laser drilling prevent the electroless copper from forming a strong anchor on the internal pads.
High-magnification cross-sectioning is the standard method for identifying these separations.
Acceptance Standard
Quality specifications like IPC-6012 define the maximum allowable separation or crack length for different classes of electronics. When an interfacial defect is detected, the entire batch usually undergoes thermal cycling to determine if the flaw will propagate into a complete open circuit. High-reliability applications in aerospace or medical fields allow zero separation at these defined boundaries.
Successful fabrication depends on the chemical balance of the micro-etch or plating baths to ensure a monolithic metallic structure.