Thermal Expansion
Thermomechanical analysis at the microscopic scale quantifies the dimensional behavior of polymeric substrates subjected to temperature changes. This micro-TMA technique isolates local coefficients of linear expansion in the z-axis, which identifies potential delamination risks within multilayered printed circuit boards. It measures material displacement under a constant force probe as the furnace ramps through defined heat intervals.
The procedure focuses on small sample cross-sections to map how specific dielectric regions react compared to neighboring copper features.
Expansion Variables
Precise control of heating rates ensures accurate recording of the glass transition temperature within the resin matrix. The probe contact area remains minimal to avoid localized compression errors that mask internal expansion patterns. Operators monitor the slope of displacement curves to extract the specific expansion coefficient for each analyzed layer.
Discrepancies between board design limits and test data determine the viability of a laminate for high temperature applications.
Reliability Assessment
Throughput analysis of these expansion results establishes whether a batch of boards can survive repeated thermal cycling without fracture. Vias often sustain the greatest mechanical stress during rapid heating cycles due to the difference between metal and resin expansion rates. Structural integrity of the board depends on maintaining these expansion coefficients within narrow windows defined by the assembly specification.
This methodology predicts the long term fatigue performance of interconnected circuitry by detecting weak points in the chemical structure before final packaging occurs.