Material Discontinuity
The separation of internal material layers within a printed circuit board represents a severe structural failure that degrades both electrical and mechanical performance. Such a internal separation is known as microstructural delamination and typically occurs at the boundary between different materials. This internal separation arises when the adhesive strength between the glass-reinforced epoxy resin and the copper foil is overcome by mechanical stresses.
Interfacial Failure
Moisture trapped within the fiberglass matrix expands rapidly during high-temperature reflow soldering, creating high localized steam pressure. This pressure acts to initiate microvoids at the interface of the resin and the copper treatment layer. As thermal stresses continue to rise, these microvoids coalesce into a visible separation that propagates along the glass fiber bundle.
Thermal cycling during operation further drives the propagation of these cracks, leading to broken copper vias and intermittent signal losses. To detect this hidden separation, cross-sectional analysis and scanning acoustic microscopy are employed on sample boards from each manufacturing lot to evaluate the integrity of the internal lamination.
Defect Prevention
Baking boards prior to reflow removes moisture and directly reduces the risk of this defect. Chemical surface treatments of the copper foil also increase the adhesive bond strength of the laminate. These preventative actions are essential for ensuring long-term reliability in harsh environments.