Hygroscopic Sensitivity
Electronic components classified by their tendency to absorb atmospheric water vapor require specific handling to prevent damage during high-temperature soldering. Moisture sensitive microcircuits are categorized by levels defined in IPC/JEDEC J-STD-020, which dictate how long they can be exposed to ambient air before they must be baked. The plastic packaging surrounding these devices is porous and gradually reaches an equilibrium with the humidity of the storage environment.
If these devices contain excess moisture when they enter a reflow oven, the water turns to steam and causes internal fractures.
Damage Mechanism
Internal pressure builds rapidly when trapped water expands at a rate faster than the package can vent the gas. In moisture sensitive microcircuits, this pressure leads to delamination between the die and the molding compound. The most visible failure is the popcorn effect, where the package physically bulges or cracks open.
Even if the package remains intact, the micro-cracks can allow corrosive ions to reach the silicon surface later in the life of the product. This internal damage is often invisible to the naked eye and requires X-ray or acoustic microscopy to detect.
Protection Standard
Sealed bags and desiccant packs keep the parts dry during shipping and storage. Operators track the floor life of moisture sensitive microcircuits using humidity indicator cards. Once the floor life expires, the parts must undergo a low-temperature bake to remove the moisture without inducing oxidation.