Radiological Resolution
X-ray imaging technology allows for the detection of microscopic defects within dense circuit board assemblies by utilizing a focal spot size measured in micrometers or smaller. This nano-focus ct equipment generates a high-magnification volumetric reconstruction of solder joints or via structures to identify voids, cracks, or bridging that exceed standard optical inspection limits. Systems operating at this scale produce clear cross-sectional images without physical destructive sectioning of the sample.
Scanning Geometry
Precise positioning of the assembly relative to the x-ray source determines the effective magnification and the resulting image sharpness. Mechanical stages move the component in small increments to collect thousands of projections across a full rotation while the detector captures the transmission data. Software algorithms then compute the three-dimensional voxel map from these projections to visualize internal features.
Signal quality depends on the stability of the beam geometry and the alignment of the rotation axis during the image acquisition cycle.
Metrological Boundary
Voxel size calculations define the theoretical limits of feature detection for any given component geometry. Artifacts including beam hardening or scatter often complicate the analysis of assemblies containing both metallic copper traces and organic laminate materials. Density variations dictate the required exposure times for the detector to maintain a high signal to noise ratio.
Correct interpretation of these reconstructed volumes requires advanced filtering tools to distinguish legitimate manufacturing flaws from software generated noise or reconstruction errors. Precise control of source voltage and current ensures the integrity of the data collected during the scan process.