Imaging Distortion
Computed tomography systems create cross-sectional views by processing numerous X-ray projections collected from various angles. A reconstruction artifact arises when mathematical algorithms produce visual irregularities during this transformation from raw scan data into final images. These errors occur because of detector sensitivity limits or deviations in the projection geometry.
They distort the geometric fidelity of the internal features of a board-level assembly. High-density components like solder balls or copper planes frequently trigger these unwanted patterns during the data processing stage.
Algorithm Sensitivity
Signal processing software attempts to model physical attenuation to generate clean cross-sections. Inaccurate assumptions about material density often force the processor to introduce noise or ghosting patterns into the output. Dense metallic structures prevent full X-ray penetration and cause the system to compensate with incorrect intensity values.
This behavior creates streak patterns that radiate from the edges of joints and pins. Software filters reduce these effects but occasionally obscure fine structural details like hairline fractures or small voids.
Inspection Impact
Verification engineers identify these features by comparing the suspect output against known physical standards and reference scans. Distinguishing between a legitimate structural anomaly and a false representation requires knowledge of the underlying slice parameters. Observers discard any data exhibiting heavy aliasing or streak noise that interferes with the ability to measure critical solder dimensions.
Consistent occurrence of these patterns usually demands a recalibration of the scanner hardware or an adjustment to the rotation increment of the turntable. Persistent data corruption renders the automated inspection of high-density electronic assemblies impossible.