Dimensional Compensation
Manufacturing adjustments compensate for the predictable shrinkage or expansion of base materials during processing. Print and etch operations use registration scaling to modify the size of the artwork before the copper is patterned. Substrates such as FR4 lose moisture and undergo stress relief when heated, which changes their physical dimensions.
If the artwork matches the nominal design size exactly, the features on different layers will not align after the lamination cycle. Engineers calculate these factors separately for the x and y axes because fiber orientation makes the movement non-uniform.
Fabrication Alignment
Inner layer cores are typically scaled up by a small percentage to account for the contraction that occurs under pressure. The registration scaling process uses historical data from previous production runs to determine the exact multiplier for a specific material type. Modern laser direct imaging systems apply these offsets dynamically by reading fiducial marks on the panel.
This ensures that every layer in the stack lines up with the drill file.
Tooling Accuracy
Yield rates depend on the precision of these offsets. Without proper registration scaling, the cumulative error from multiple layers will cause annular ring breakouts on the outer surfaces. Statistical process control monitors these movements to refine the scaling model for future production batches.