Elemental Quantification
Proportionality constants used in secondary ion mass spectrometry normalize the differing signal intensities of various chemical elements. The relative sensitivity factors convert the raw counts of detected particles into the actual atomic concentration of a material. This calibration is necessary because some atoms ionize more easily than others under a bombardment of primary particles.
Ionization Efficiency
Matrix effects and the specific chemistry of a sample surface can influence how many ions escape the material and reach the detector. Using a relative sensitivity factors approach allows a technician to compare different elements within the same sample accurately.
Analytical Calibration
Reference materials with a uniform and known composition provide the baseline for calculating these coefficients. Analysts measure the peak area for each element in the standard and divide it by the concentration to find the specific factor for each atomic species. Once established, these relative sensitivity factors are applied to unknown samples to determine the purity of gold plating or the presence of contaminants in a solder joint.
The precision of this method is critical for failure analysis when a board fails due to trace impurities. Data prevents incorrect conclusions about the source of a chemical defect. Chemical analysis relies on these ratios to provide a quantitative map of the sample.