Residue Cleansing
The chemical process of liquefying and removing the polymerized rosin binder from a circuit board surface after reflow soldering represents the primary mechanism of defluxing. Rosin matrix dissolution occurs when a suitable solvent or aqueous saponifier breaks the intermolecular bonds of the rosin residue. This action allows the solid organic matter to be rinsed away from the printed board surface.
Solvent Chemistry
Cleaning agents must be carefully matched to the type of flux residue left on the assembly. During the reflow cycle, rosin is subjected to high heat which causes it to polymerize and become more resistant to cleaning. Complete rosin matrix dissolution requires a solvent with a matching solubility parameter to break down these heat-treated compounds.
The bath temperature is often raised to increase the rate of this chemical breakdown and to help the solvent penetrate under low-clearance surface-mount components. Mechanical agitation, such as ultrasonic energy or spray-under-immersion nozzles, is also applied to accelerate the transport of dissolved residues away from the circuit tracks.
Contamination Prevention
Failure to remove flux residues completely can lead to long-term reliability problems in the field. Insufficient rosin matrix dissolution leaves behind organic residues that can entrap ionic contaminants and moisture. These trapped ions can cause dendritic growth and leakage currents when the board is put into service.