Separation Gap
The empty space between the edges of adjacent circuit boards in a panel allows the routing tool to move freely during the separation process. This routing channel must be wide enough to accommodate the diameter of the milling bit while providing a buffer for mechanical tolerances.
Panel Density
Maximizing the number of boards on a single panel requires narrowing the routing channel as much as possible. However, if the channel is too narrow, the tool may clip the edge of the circuit or damage nearby surface features. A standard width is often twice the tool diameter to allow for a single pass or a cleaner finish with multiple passes.
The removal of the waste material occurs within this space once the perimeter is fully cut.
Exhaust Removal
Debris accumulation can lead to heat build-up and poor edge quality if the extraction is insufficient. Friction within the routing channel increases if the feed rate is too high for the spindle speed, potentially causing the laminate to burn. The vacuum system of the routing machine must efficiently extract the dust and chips generated within the space.
Clear paths also facilitate the use of inspection cameras that track the alignment of the cut in real time.