Cutter Width
The physical width of material removed by a rotating cutting tool during mechanical panel profiling defines the channel path between circuit boards. In mechanical routing operations, routing kerf accounts for the diameter of the carbide end mill plus mechanical runout during panel singulation. Designers incorporate this clearance gap into panel layouts to prevent routing bits from cutting into functional conductor traces or SMT pads.
IPC-2221 specifies dimensional tolerance guidelines for panel cutout channels, ensuring proper clearance between adjacent board edges during automated routing.
Milling Dynamics
Tool selection and feed rates dictate the precise width of the routed channel during high-speed milling. A standard two-millimeter routing bit produces a kerf slightly wider than its static diameter due to spindle vibration and tool deflection under cutting loads. High spindle speeds reaching sixty thousand revolutions per minute produce clean board edges, but bit wear gradually alters routing kerf dimensions over extended production runs.
Worn milling bits generate excessive heat and mechanical chatter, causing edge delamination or glass fiber pullout along substrate borders. CNC routing machines apply tool radius compensation to offset tool wear and maintain exact outline dimensions.
Tolerance Boundary
Dimensional inspection tools verify profile accuracy after board singulation. Standard IPC-6012 sets acceptable dimensional tolerances for finished circuit board outlines, checking routed edge quality and corner radii against fabrication drawings.