Transmission Analysis
High-frequency circuit performance is evaluated by measuring the scattering parameters that quantify signal reflection and transmission across a network. A decline in these values, known as s-parameter degradation, indicates a loss of signal integrity due to increased reflection or attenuation along the transmission lines. This shift arises from changes in impedance matching or material properties.
Designers monitor these changes to predict the functional lifetime of high-speed interconnects.
Material Degradation
Thermal aging and moisture absorption alter the dielectric constant and loss tangent of board substrates. These shifts change the characteristic impedance of the traces, which increases signal reflections and causes s-parameter degradation. High temperatures also accelerate copper oxidation, which increases resistive loss at high frequencies.
Protective solder mask and surface finishes help slow these material changes.
Test Validation
Network analyzers track the performance of test coupons on the panel during thermal stress testing. Comparing the initial s-parameters to those measured after thermal shock reveals the extent of s-parameter degradation. This analysis helps engineers identify defects such as micro-voids, plating cracks, or delamination in the vias that might otherwise pass standard electrical tests.
Continuous tracking across a range of frequencies provides a complete picture of the board’s high-speed performance limit. These evaluations are standard protocol for qualifying new laminate materials and manufacturing processes for aerospace and telecommunication applications.