Serial Pathway
Design-for-test architectures utilize a dedicated serial shift register chain to access and control the internal nodes of an integrated circuit. This serial chain, referred to as a scan path, connects the boundary-scan cells of a device in a daisy-chain configuration from the test data input to the test data output. It allows a test controller to shift test patterns into the device and shift out the captured response states.
This methodology transforms complex sequential testing problems into simpler combinational ones.
Register Chain
Each boundary-scan cell acts as a single shift register stage within this continuous serial loop. Creating a functional scan path requires connecting the scan-out pin of one cell to the scan-in pin of the subsequent cell.
Test Execution
During board-level electrical testing, the test controller uses the serial chain to verify board interconnects without using physical test probes. The test controller shifts a test pattern through the scan path until it reaches the target output pins, where it is driven onto the board. After the signals propagate across the board trace, the receiving cells capture the states and shift them out through the serial exit.
Any discrepancy between the shifted-out vector and the expected pattern indicates a solder defect, a short circuit, or a faulty trace on the board.