Electrochemical Control
Charge transfer resistance and activation overpotential at the board interface alter the baseline pattern of copper deposition in an electroplating cell. For secondary current distribution, the electric field is modified by the polarization of the cathode, which depends on the local reaction rate. This electrochemistry-driven model is more realistic than the primary model because it accounts for the voltage drop across the double layer.
As a result, it predicts a more uniform deposition of copper across the panel surface.
Additive Impact
Organic suppressor and accelerator additives modify the local activation overpotential to equalize deposition rates. Under secondary current distribution, these additives increase resistance at trace corners. This action forces the current to redistribute toward recessed areas like microvias.
Process Design
Simulation tools that incorporate the Tafel equation or Butler-Volmer kinetics allow engineers to optimize chemical and electrical parameters. By calculating the secondary current distribution, process engineers can select the optimal current density and additive concentrations for a specific board design. This modeling prevents the occurrence of thin plating on inner layer connections, which is a common source of thermal failure.
The resulting plated panels demonstrate consistent trace dimensions and reliable vertical interconnects across different batch sizes.