Lateral Erosion
Lateral chemical dissolution occurs beneath photoresist borders during wet chemical etching of metal layers in printed circuit board fabrication. Uncontrolled side etch reduces the cross-sectional width of copper conductors relative to the defined photoresist pattern, creating a trapezoidal trace profile. Etch factor calculations express the ratio of vertical etch depth to lateral undercut, quantifying the precision of the wet processing system.
Chemical Undercut
Chemical spray pressure and solution chemistry determine the extent of lateral undercut as liquid etchant attacks conductor sidewalls. As acid cupric chloride or alkaline chemistry dissolves exposed copper downward toward the dielectric substrate, side etch proceeds simultaneously under the edge of the organic resist mask. High spray pressures and optimized nozzle geometries increase etchant turnover on horizontal surfaces relative to vertical sidewalls, maximizing the etch factor.
Over-etching increases side etch dimensions significantly, narrowing trace top widths and altering high-frequency transmission line impedance. Compensating conductor widths on CAD artwork compensates for predicted lateral dissolution, ensuring final etched conductors match electrical target widths within specified tolerances.
Geometry Control
Differential etching between top and bottom copper interfaces generates trapezoidal conductor profiles that alter signal propagation characteristics. Etchant temperature control and conveyor speed adjustments keep lateral undercut within predictable limits across large panel arrays. Monitoring trace geometry through microsectioning ensures conductor cross-sections satisfy electrical current density ratings.