Molten Flow
Liquid metal forms a stable ridge through the action of a pump forcing molten material upward through a nozzle. This solder wave facilitates the joining of leads to copper pads on a printed circuit board. Molten alloy creates an electrical and mechanical connection as the board assembly passes over the peak.
Contact Geometry
Proper wetting relies on the adjustment of the nozzle height and the speed of the conveyor system. Precise dwell time ensures that thermal energy saturates the interface without causing component damage. Board angle affects the drainage of excess alloy after the assembly leaves the exit side of the metal ridge.
Gravity pulls the fluid away from the underside of the board to prevent bridging between adjacent pins.
Process Control
Impurities in the bath alter the surface tension and prevent consistent joints across high density patterns. Dross removal happens periodically to maintain the purity of the metal mixture. High flux concentrations allow for better wetting but require extra cleaning steps to avoid long term corrosion of the finished assembly.
Uniform heating across the underside of the board prevents thermal shock during the transition into the molten peak. Constant monitoring of the temperature provides the necessary stability for reliable solder joint formation.