Surface Affinity
Formation of a continuous and uniform metallic bond between the molten solder and the base metal defines the success of the soldering operation. Excellent solder wetting results in a low contact angle where the solder spreads smoothly across the copper pad or component lead. Intermetallic bonding creates a layer that provides both electrical conductivity and mechanical strength.
Factors such as surface cleanliness, temperature, flux chemistry and contact time determine how well the metal adheres to the board.
Visual Indicator
Inspectors evaluate the quality of a joint by the shape and luster of the solder fillet. A well-wetted joint features a concave shape and a smooth transition from the solder to the pad edge. When solder wetting is poor, the metal beads up like water on a waxed surface, a condition known as non-wetting or de-wetting.
Surface characteristics identify potential reliability issues before the board leaves the factory.
Chemical Barrier
Oxidation on the surface of the copper or the component terminal acts as a barrier to the bonding process. Flux serves to remove this oxide layer when heated, allowing the molten solder to reach the clean base metal underneath. If the flux is exhausted or the temperature is too low, the solder wetting process remains incomplete.
Prolonged storage of components can also lead to thick oxide layers that resist standard assembly techniques.