Integrity Assurance
Systematic validation of the physical architecture, layer stackup and mechanical continuity of a printed board confirms compliance with design specifications and fabrication workmanship standards. Conducted as a post-manufacturing lot acceptance process, structural verification evaluates whether physical cross-sections, copper weights, dielectric thicknesses and internal via geometries match the fabrication master drawing and quality classes. Destructive metallographic microsectioning serves as the primary method, providing direct cross-sectional views of internal layers, plating barrel thickness and microvia interfaces.
Non-destructive techniques like X-ray tomography and acoustic microscopy complement destructive checks by scanning for internal delamination or barrel voids without destroying the test specimen. Fabricators and receiving facilities perform these evaluations to ensure boards will endure thermal assembly stresses and field environments without physical breakdown.
Microsection Analysis
Precision metallographic grinding and polishing expose target features along internal hole centerlines for optical analysis. Technicians mount coupon cutouts in liquid epoxy resin, grind the hardened pucks down to the center of plated through-holes, and polish the viewing surface to a scratch-free finish. Microscopic examination measures copper plating thickness in the barrel center, knee and surface pads against IPC-6012 criteria.
Chemical micro-etching reveals plating boundaries, separating initial foil from electroless deposits and electrolytic copper layers. Inspection detects barrel cracks, foil cracks, resin recession, delamination and drill smear on inner pads.
Verification Protocol
Acceptance limits are governed strictly by the target specification class defined by the procurement documentation. For Class 3 high-reliability applications, structural verification mandates zero internal delamination, strict minimum copper thickness averages along the hole walls, and tight limits on etchback or negative etchback depth. Evaluators confirm glass weave alignment and verify prepreg resin coverage across tight-pitch inner traces to guard against conductor anodic filamentation.
This physical verification evaluates bare board mechanical and metallurgical construction following fabrication and thermal stress routines. It stops short of validating functional electronic circuit performance, signal timing integrity or passive component tolerances, which remain the domain of electrical test routines.