Insulating Dimension
Multilayer printed circuit board stackups rely on precisely controlled insulating layers to separate copper trace geometries and establish target electrical characteristics. Expressed in micrometers or mils, substrate dielectric thickness measures the vertical separation distance between conductive copper layers across core and prepreg materials. The physical dimension directly dictates trace characteristic impedance, breakdown voltage, crosstalk, and propagation delay between adjacent trace runs.
PCB fabricators specify prepreg glass style and resin content combinations to achieve target dielectric spacings during lamination.
Lamination Variance
Lamination temperature, pressure profiles, vacuum levels, and resin flow during curing introduce variations in final cured thickness. Resin squeezes out into copper clearance areas, causing dielectric thinning over high-density copper zones relative to sparse copper areas. A nominal four-mil core material can vary by ten percent across a production panel depending on pattern density and resin fill requirements.
Fabricators compensate for resin displacement during stackup modeling by adjusting starting prepreg sheet counts based on copper foil weight and trace coverage ratios.
Microsection Verification
Microsection cross-sectioning and optical metrology verify cured dielectric dimensions during post-fabrication quality inspection. A ten percent decrease in dielectric separation causes roughly a seven percent drop in microstrip single-ended characteristic impedance. Controlled impedance coupons placed on panel borders undergo time-domain reflectometry testing to ensure signal traces fall within specified tolerance limits.