Mathematical Formulation
Electromagnetic modeling of conductor losses in printed circuit boards requires a mathematical representation of copper surface roughness. The Cannon-Huray roughness model applies a multi-sphere approach to approximate the irregular, nodular topology of treated copper foil. By treating the surface as a flat plane populated by a hexagonal array of copper spheres, the calculation avoids the computational overhead of full-wave three-dimensional simulations.
Power loss estimation relies on the ratio of sphere radius to skin depth, scaling the classical smooth-conductor attenuation by an analytically derived roughness factor.
Parameter Extraction
Practical application of the analytical method depends on acquiring physical dimensions of the foil treatment from scanning electron micrographs. Copper foil manufacturers do not typically publish the sphere count or nodule radii, forcing signal integrity engineers to extract these parameters through iterative curve-fitting of measured insertion loss data. The extraction process matches simulated trace losses against physical measurements from vector network analyzers over a wide frequency band.
A single, uniform sphere radius often suffices for lower frequencies, but multiple sphere sizes become necessary to capture high-frequency skin effect behavior.
Loss Prediction
Signal attenuation at frequencies above ten gigahertz is heavily influenced by the chosen roughness parameters. When the skin depth becomes comparable to the nodule size, the current is forced to follow the contours of the copper spheres, increasing the effective resistance of the conductor. The Cannon-Huray roughness model provides a closer match to physical measurements than older models that assume a uniform, periodic surface.
It is particularly effective for modeling low-profile and ultra-low-profile foils used in high-speed digital designs. Circuit board fabricators rely on these predictions to guarantee impedance and loss budgets before manufacturing high-layer-count backplanes. Engineers also use this model to evaluate the impact of different foil treatment types on transmission line behavior across multiple laminate choices.
By predicting the frequency-dependent attenuation accurately, the model helps prevent costly board re-spins and ensures that the final assembly meets stringent high-speed signal specifications.